The best way to avoid stained carpets is to be extra careful when eating, drinking (especially red wine), or walking on them after being outside walking in mud or dirt . Small spills can ruin your day and make you have to spend the rest of the day cleaning up carpet stains. However, accidents do happen. The best course of action is to request the services of a professional carpet cleaner. But if time is of the essence and you need to clean your carpet urgently, here’s how to remove cola stains from the carpet.
Detailed Instructions for Removing Coke Stains from Carpet
Technique #1
What you’ll need?
Here are the tools and supplies you’ll need to get the carpets clean:
- The water should be warm
- A can of club soda
- White cloths or towels that are clean and dry
- Any vacuum cleaner that is capable of vacuuming wet surfaces (both specialized and general)
- If used: liquid dish detergent, hydrogen peroxide, vinegar, and ammonia
Guidelines
1. As soon as you find the coke, you should treat the carpet immediately – don’t let it soak into the carpet since it will be harder to remove.
2. Use a clean cloth or towel to wipe the stained area. If you work from the outside in, be careful not to spread the soda too far. Be careful not to scrub the carpet too hard as this may result in the soda soaking into it further.
The carpet may need to be raked if it is flattened or matted to widen the spaces between the carpet fibers, making it easier to remove the Coca-Cola stains.
You may clean your carpet with your vacuum if you vacuum your wet surfaces too.
- Spray the carpet with club soda. Spray just a little so the rug doesn’t get soaked.
- Remove wet materials and let them dry.
- Remove excess stains by vacuuming or blotting. As a result of the detergent, a vacuum cleaner will scoop up all the dried bits on the carpet.
- Make one teaspoon of liquid dish detergent mixture and 2 cups of warm water if the stain is not removed.
- Do not soak the carpet with detergent.
- Give it about five minutes to sit.
- Buff gently the area that has been treated.
- Use warm water to rinse the carpet.
- Using hydrogen peroxide and water to remove the stain again if that didn’t remove it before. It would help if you didn’t use hydrogen peroxide on colorful carpets since it has a bleaching effect. Make sure you only use it if your carpet is light-colored – if someone spills on it, it won’t be as apparent as if their carpet were dark.
- Clean the affected area with hydrogen peroxide.
- Block off light by covering the area with a thick towel. This will prevent hydrogen peroxide from becoming reactive.
- Wait 30 minutes before using the area. Watch for color loss and check the stain every 30 minutes.
- After 30 minutes sprinkle warm water over the carpet without soaking it. If you notice the color loss or if 30 minutes have elapsed, repeat the procedure.
- Clean the mess up.
- To prevent the recurrence of skin infections, mix 1 cup warm water with 1/4 cup clear ammonia. Preparing a mixture equally composed of vinegar and water will also be necessary.
- Clean the stained area with ammonia mixture. Avoid soaking carpets.
- Buff the carpet gently or stroke it gently.
- Do not soak the carpet when applying the vinegar mix.
- You should use water to rinse the carpet. Avoid soaking it.
- Clean up any remaining debris on the carpet with a vacuum or a blower.
Depending on the stain, you may need to repeat the method multiple times to remove it. It would help if you used the lightest solution on your carpet – heavier solutions will damage it.
You can keep doing this until you don’t see any improvement with each pass. Once that happens, move on to the next step.
This method has the advantage of having readily available supplies and tools. In addition, as its base form doesn’t contain hydrogen peroxide or other harmful substances, this method is relatively light.
If your base guide doesn’t work, you will have to use hydrogen peroxide, ammonia, and vinegar.
If your carpet came with the manufacturer’s cleaning instructions, make sure to read them. If certain substances or chemicals need to be avoided, you will learn about them from these guides.
Technique #2
You can try another method if you require supplies for the first method but do not have access to them or otherwise are unable to use it to clean your carpet.
What you’ll need?
This method requires the following items:
- The water should be warm
- Vinegar of white color
- Laundry detergent that does not contain chlorine
- White cloths or towels
- Cleaning with vacuum cleaners
Guidelines
1. Using a clean white cloth or towel, wipe the stained area. Don’t scrub the carpet; blot from the edges to the center.
If your vacuum cleaner can handle wet surfaces, you may use it.
- 1 cup of warm water and 1/4 tsp of gentle detergent.
- You need equal parts vinegar and warm water.
- Scrub the stained area carefully with the detergent mixture. If applying it using a towel, dampen it in the mix and lightly press it into the affected area.
- Wait 15 minutes before vacuuming the carpet.
- Use a second dry cloth to pat the stain until it has become dry.
- Using a cloth, gently wipe the stain with the vinegar solution.
- Apply the cloth to the soda stain. Use the fabric you used to apply the vinegar to cover the area.
- Let the cloth sit for 15 minutes with a heavy object on top.
- Clean and dry the stain with a cloth.
- You may need to repeat this step.
Technique #3
The following method may work if the above methods do not or if you do not have the supplies.
What you’ll need?
To remove coke stains, you’ll need the following things:
- Cold water
- It would help if you did not use bleach in liquid laundry detergent, as it will damage your carpet. Liquid laundry detergent also needs to be precise.
- White cloths or towels that are clean and dry
- Cleaning with vacuum cleaners
- The removal of carpet stains is an optional step
Guidelines
- Blot as much soda as you can from the affected area. If you decide to scrub, rub only a little from the edges and apply too much pressure.
- Make a solution for your heavy-duty laundry detergent and cold water. Mix 1/4 teaspoon detergent with 1/2 cup cold water.
- Blot the stain with the mixture again after applying for the medicine. You can also use a clean towel.
Warm water is not needed for heavy-duty detergents since the enzymes do not require high water temperatures.
- Make sure the area has completely dried after treatment.
- Use a vacuum to remove all dirt and debris.
You could try adding a carpet stain remover to the mixture if the above steps didn’t solve your problem completely. Surfactants are added to carpet stain removers to enhance cleaning effectiveness.
Various carpet stain removers come with different instructions, so make sure to read them carefully.
If it doesn’t work, increase the amount only if it is not working. Using a carpet stain remover in excess may lead to build up and make removal more difficult.
In addition, you can pass the carpet more than once. A single-pass often isn’t enough to remove coke stains. If improvement is not seen, repeat the step.