Nothing makes our homes trendier than a carpet. In fact, carpets are so popular that statistics show that more than 51% of homes are carpeted.
However, after going through stains, snagging from pet claws, or dents from unmoved furniture, it is no secret that your carpet will start to look flat and worn out.
Fear not, as there are easy ways to make your carpet fluffy again. Other than brushing and vacuuming, you can use vinegar, ice cubes, or just iron the carpet to make it look brand new.
Keep in mind, before you start the fluffing process; make sure you vacuum the carpet to remove any dust and debris.
So, without further ado, let’s look at the 5 quick tactics on how to fluff up your carpet.
How to Fluff Up Your Carpet Using White Vinegar
Vinegar is a great chemical substance that not only brings back life to your carpet but removes odors and loose stains from it. So, for the best fluffy results, here are a few steps to follow.
- Mix equal parts of vinegar and water in a clean spray bottle
- Spray the flattened area of the carpet but avoid soaking it
- Let the mixture sit on the carpet for 10 minutes if the dent isn’t deep and 30 minutes for deep impressions.
- After the time is up, gently blot out as much liquid as possible using a white cloth. Make sure you tap gently on the area unlike rubbing on it.
- Next, get a spoon and hold the edge directly against the area of the carpet you intend to fluff. Press it into the carpet and scrape it across the carpet in straight lines.
- Then, brush the area with a boar hair brush to even out the carpet
- Finally, allow the carpet to dry properly for 2- 3 hours. In case it’s sunny, you can take it outside to speed up the drying process.
How to Fluff Up Your Carpet Using an Iron
Another quick tactic to deal with a dented carpet or the small areas under your furniture legs is an iron and damp cloth. This method loosens up the carpet fibers making them fluffier.
Steps to follow are:
- Start by vacuuming the carpet to get rid of dust or any debris
- Heat up your iron to medium and low heat, then, dampen a clean white towel and place it over the flat area.
- Hold the iron a few inches above the towel and gently move it around in a circular motion for one minute. Be careful not to press the iron directly on the towel to avoid damaging the carpet fibers.
- After the minute is gone, set the iron safely aside and remove the towel from the flat area.
- Making sure the area has cooled down a bit, rub it with your fingers so the fibers can spring back up again.
- If you aren’t satisfied, repeat the process again until the area becomes fluffy again. Do note, when dealing with a more stubborn area you can scrap the carpet with the edge of a spoon.
- If that doesn’t work, use a fork or a bristle brush to comb the flat even more.
- Finally, after it’s all dry, vacuum the area to achieve a better carpet fiber lift.
How to Fluff Up Your Carpet Using Ice Cubes
Apart from making drinks more refreshing on a sunny day, ice cubes can also be a great remedy when it comes to fluffing your carpet. Here are simple steps to dealing with any furniture indentations.
- First, get some ice cubes from the freezer and set them on the dented area of your carpet. If you dealing with multiple dented areas, place at least one ice cube on each dent. Moreover, if the dents are more than two inches place more than one ice cube to cover the whole area.
- After placing the ice cube on the dents, allow it to melt naturally. This might take twenty minutes to an hour depending on the room temperature.
- Once the ice is completely melted, use a clean white towel to soak up the water. Press gently so as not to dent the carpet again.
- Finish up by rubbing the dented area with your fingers until the carpet fibers stand up. If this doesn’t give work fully, scrape the carpet with the edge of a spoon or comb the carpet with the tines of a fork.
- Don’t forget to use a soft brush to even up the carpet once you have fluffed back up all the dented areas.
How to Fluff Up Your Carpet Using a Blow Dryer
A blow dryer is another great tactic to deal with any dents or matted areas on your carpet. Here’s how to fluff up your carpet using a blow dryer.
- Find a new spray bottle and fill it with warm water
- Spray the flattened carpet with the water ensuring you cover every dented area. Just make sure not to soak up the area to avoid ruing the carpet.
- Get your blow dryer and set it to a low setting, and a high fan setting.
- Hold the blow dryer a few inches away from the carpet and move it back and forth across the flattened area.
- When the carpet is almost dry, rub your fingers on the area to straighten the fibers up.
- If the area isn’t well fluffed, use a brush with stiff but soft bristles on the carpet.
How to Fluff Up Your Carpet Using a Carpet Rake
Just like the above tactics, a carpet rake comes in handy when you want to fluff up your high pile carpets. A simple tool to use, these steps will surely get you the best fluffy results.
- Start by vacuuming the entire carpet to get rid of dirt and debris.
- Take the carpet rake and start pulling gently in one direction making sure not to stab too deeply to avoid loosening the fibers.
- In the second round, use a pull and push motion to further restore the carpet’s fluff.
- Vacuum the carpet once again to ensure the carpet is completely fluffed up.
Final Words
No matter how dented or matted your carpet is, it is possible to keep it fluffy at all times. All you need is to use one of the 5 quick tactics carefully and you are good to go.
Don’t forget, regardless of the tactic you use to fluff up your carpet, make sure to vacuum and steam clean your carpet frequently.
What’s more, to prevent dents under the furniture, regularly move the furniture around or just put protective barriers under them. Keep your carpets looking fresh and clean with our Northampton based carpet cleaning company. We can remove a variety of stains from makeup stains to coffee stains, we’re waiting for your call!